LynxTWO-A not connecting to LS-ADAT

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   This is an on-going problem, as yet unresolved. In order to resolve it I need to know what voltages are expected to be seen at the LStream Ribbon connector on the LynxTWO-A card. There is a 14 contact keyed socket Pins 1-13 (odd) are at GND. Checking with a DMM against a GND pin and pins 2-14 I get: pins 2-10 = 2.2mV AC. and against pins 12-14 = 5.4VDC. Please could someone confirm these are either correct or that I have a problem!! The LS-ADAT has been checked as OK. The LynxTWO-A gives the expected Mixer deflections at Mixer Output and at Record/Play from an input digital stereo signal.  I am using a Thandar 351 Digital Multimeter for these tests.  Michael  UK  

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Michael@Studio1 Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: May/30/2015 Location: United Kingdom Points: 2	Topic: LynxTWO-A not connecting to LS-ADAT Posted: May/30/2015 at 10:05am
	This is an on-going problem, as yet unresolved. In order to resolve it I need to know what voltages are expected to be seen at the LStream Ribbon connector on the LynxTWO-A card. There is a 14 contact keyed socket Pins 1-13 (odd) are at GND. Checking with a DMM against a GND pin and pins 2-14 I get: pins 2-10 = 2.2mV AC. and against pins 12-14 = 5.4VDC. Please could someone confirm these are either correct or that I have a problem!! The LS-ADAT has been checked as OK. The LynxTWO-A gives the expected Mixer deflections at Mixer Output and at Record/Play from an input digital stereo signal. I am using a Thandar 351 Digital Multimeter for these tests. Michael UK
	Michael@Studio1