L22 freezes with all meters up and 64MHz clock
Printed From: Lynx Studio Technology, Inc.
Category: Lynx Forum
Forum Name: Lynx Support Forum
Forum Description: Discussions about Lynx Hardware & Software
URL: https://www.lynxstudio.net/forum/forum_posts.asp?TID=5421
Printed Date: September/27/2024 at 11:12am
Software Version: Web Wiz Forums 11.04 - http://www.webwizforums.com
Topic: L22 freezes with all meters up and 64MHz clock
Posted By: vzaichenko
Subject: L22 freezes with all meters up and 64MHz clock
Date Posted: September/05/2014 at 2:12am
|
Hi, Got L22 freezing after some hours of operation  Motherboard is ASUS Z97-P. Some history behind it: - I had Gigabyte initially. Lots of issues. - Updated to v25c - still had the problem with card freeze. - Changed to ASUS H87 - got blue screen every 8-12 hours. - Changed to ASUS Z97-P - current one - card freezes again from time to time. Thought trying to downgrade the firmware to v24, but updater says "your firmware is up to date" and leaves... What would you recommend? Thank you, Valery
|
Replies:
Posted By: PaulTech
Date Posted: September/05/2014 at 12:48pm
|
Valery, Here are the steps to get the firmware back: * Download http://www.lynxstudio.com/nav/getFile.asp?i=80&t=download" rel="nofollow - this update r * Run the updater until the intro screen, that details the current and new firmware versions. * Hit "cancel" * Click Start > All Programs > Accessories > Run * Type in C:\Lynx\L2Update OVERRIDE * Follow the prompts to complete the programming. Let me know if you have any trouble with that. ------------- Paul Erlandson Lynx Studio Technology Support 714-545-4700 x 206 http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook! |
Posted By: vzaichenko
Date Posted: September/08/2014 at 2:13am
|
Thank you Paul, v24 seems to work stable, with some random dropouts from time to time, mostly at the moment when the sound starts playing... Is there something to look at with regards to dropouts? Some settings? P.S. Average DPC latency is 1000 uS (up to 1333 uS at rear maximums). |
Posted By: PaulTech
Date Posted: September/09/2014 at 4:09pm
|
Have you tried increasing the buffer size? ------------- Paul Erlandson Lynx Studio Technology Support 714-545-4700 x 206 http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook! |
Posted By: vzaichenko
Date Posted: September/11/2014 at 2:36am
| Yep - set at 1024. Still got dropouts. They never happen during ongoing playback (no matter how long it is), but almost always happen in the beginning of it. |
Posted By: vzaichenko
Date Posted: September/11/2014 at 3:02am
| Same situation at any sample rate... |
Posted By: David A Hoatson
Date Posted: September/11/2014 at 9:52am
|
1000us DPC latency is quite high You need to correct that issue before you are going to be able to get clean playback. ------------- Thank you, David A. Hoatson Lynx Studio Technology, Inc. Co-founder, Chief Software Engineer |