Lynx Support Forum - How lynx two mixer is seted?

Print Page | Close Window

How lynx two mixer is seted?

Printed From: Lynx Studio Technology, Inc.
Category: Lynx Forum
Forum Name: Lynx Support Forum
Forum Description: Discussions about Lynx Hardware & Software
URL: https://www.lynxstudio.net/forum/forum_posts.asp?TID=6097
Printed Date: April/30/2025 at 9:43am
Software Version: Web Wiz Forums 11.04 - http://www.webwizforums.com

Topic: How lynx two mixer is seted?

Posted By: yangjxi
Subject: How lynx two mixer is seted?
Date Posted: January/09/2016 at 10:42pm

My equipment is lynx two B.LYNX TWO-B is used for 5.1 home theater. 1-5 channels for the front, surround, center, 6-channel for the subwoofer. Settings Menu is how to be better utilized?

"Analog In 1 & 2 HPF, Analog In 3 & 4 HPF": the high-pass cut-off frequency?Is used in home theater need to select it anyway?

"D> A De-emphasis": this need and pre-emphasis to be used together?lynxtwo B is for home theater needs this choice?

Replies:

Posted By: PaulTech
Date Posted: January/13/2016 at 5:12pm

In the Sound Section of control panel set the speaker configuration to 5.1

Do not change the HPF values. Those are only for a case where a hardware modification was performed on the hardware

Also, do not use De-Emphasis unless you are playing material with the emphasis bit turned on (this is very very rare)

-------------
Paul Erlandson
Lynx Studio Technology
Support
714-545-4700 x 206
http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook!