Lynx Support Forum - Turning on LStream Loopback on E44

Print Page | Close Window

Turning on LStream Loopback on E44

Printed From: Lynx Studio Technology, Inc.
Category: Lynx Forum
Forum Name: Lynx Support Forum
Forum Description: Discussions about Lynx Hardware & Software
URL: https://www.lynxstudio.net/forum/forum_posts.asp?TID=6257
Printed Date: April/19/2025 at 11:26am
Software Version: Web Wiz Forums 11.04 - http://www.webwizforums.com

Topic: Turning on LStream Loopback on E44

Posted By: zantafio
Subject: Turning on LStream Loopback on E44
Date Posted: September/28/2016 at 1:05am

Hi,

i have seen on the product site that a loopback feature used to exist on LynxTWO-A but i can't find it on the E44 card which is said to be the substitute for it. Is there anything special i need to do to activate it, like setting a jumper, or is it a card limitation ?

Thanks,

Marc.

Replies:

Posted By: PaulTech
Date Posted: September/28/2016 at 11:05am

I'm afraid the E22 and E44 do not have the loopback function.

You could do a physical loop with the digital I/O if you are not using the digital I/O for some other purpose.

-------------
Paul Erlandson
Lynx Studio Technology
Support
714-545-4700 x 206
http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook!

Posted By: zantafio
Date Posted: September/29/2016 at 3:15am

Hi Paul,

thanks for the idea, i am not using the digital I/O at all. If i understand well, i can choose the WASAPI digital output 1 in my audio application, physically loop it with digital input 2 and use that one as an ASIO input in my DAW, am i right ?

One last question, which pins shoud i wire together ? Just Digital Out 1 Hot and Cold to Digital In 2 Hot and Cold, or do i also need to link Clock In and Out ?

Thanks for your support,

Marc.

Posted By: PaulTech
Date Posted: October/05/2016 at 1:58pm

That's right. Digital Out will be Play 3+4, and Digital In will be Record 3+4

You need to connect Out hot to in hot, Out cold to In cold, and also connect the grounds. The Pin out is on page 49 of the http://www.lynxstudio.com/nav/getFile.asp?i=129&t=productfile" rel="nofollow - E22 manual .

-------------
Paul Erlandson
Lynx Studio Technology
Support
714-545-4700 x 206
http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook!

Posted By: kmmcdonald
Date Posted: October/09/2016 at 8:54am

As I am presently considering replacing my L22 with an E22, this is a major issue for me and comes as a big surprise. Is it possible that this feature can be reinstated with an FPGA and/or firmware modification?

-------------
Keith in AZ

Posted By: PaulTech
Date Posted: October/11/2016 at 4:58pm

that is possible and something we are looking at

-------------
Paul Erlandson
Lynx Studio Technology
Support
714-545-4700 x 206
http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook!