Lynx Studio Technology
home products news & events support how to buy company contact
Search
Support Center
Downloads
Contact Tech Support

Frequently Asked Questions
Aurora
LynxONE
LynxTWO/L22
Lynx AES16 / AES16e
Lynx LS-ADAT / LS-AES
LT-HD

Software Application Notes
Hardware Test Procedures
Connector Pin Outs
Other useful documents
Videos
Support Documents
Support Forum
User Manuals
Register Your Products
Buy Cables Now
LynxONE
• Getting Started/Installation
• Troubleshooting
• Operation
• Compatibility


  • When Windows starts I see a LynxONE Mixer error - "No mixer device drivers are available".
  • I installed the LynxONE in the PCI slot before I ran Setup.exe for Windows 95/98, what do I do now?
  • The meters in the LynxONE Mixer do not show activity when I am monitoring from the analog or digital inputs.
  • The Lynx mixer reports a sample rate of 22k when I first boot into Windows. Why?
  • I cannot record from the LynxONE’s digital input.
  • There is no signal on the digital output during playback.
  • I’m trying to play 96k audio out the digital output, but my application is saying that sample rate is not supported.
  • Audio playback sounds really slow or erratic.
  • Audio playback sounds fast or slow when I am using the digital input as the clock source.
  • My audio output is way too loud.
  • My input signals are too low.
  • I cannot change the Sample Clock Source from Digital in the LynxONE Mixer.
  • When I choose either External or Header as the Sample Clock Source, I cannot select Word as the Sample Clock Reference.
  • When I log into my Windows 2000/XP computer as an Administrator everything works fine. When I log in as a User, I cannot use my LynxONE. When launching the Lynx Mixer, I get an error message: “No mixer device drivers available.”


I cannot record from the LynxONE’s digital input.
All OS

The LynxONE Digital Input device must be configured as the record device in your application. Select this device in the audio or wave device configuration menu. With the device properly set, the meters in the LynxONE mixer will indicate the digital input signal level while recording. See "Working with Third Party Applications" in the Installation and Users Guide for more information.

Home | Products | News & Events | Support | How To Buy | Company | Contact Us | Employment | Privacy

Lynx on Facebook   Support on Facebook 		© Copyright 2024, Lynx Studio Technology, Inc.