For the AES16, all 16 Lynx Mixer input channels already route to physical inputs on-board, so you must manually configure Lynx record devices to use the inputs from the LS-ADAT.

From the Lynx Record/Play Mixer, physical inputs can be routed to Lynx record devices. Click the Input Source Selection button at the top of a channel strip for a menu of input sources. The LStream inputs available here provide access to the 16 input channels from the LS-ADAT.

For a real world example, let’s say that you want to record audio from LS-ADAT In 1 Channels 1 and 2. From the Record/Play Mixer, click the Input Source Selection button on Record 5 Left and choose LStream > “LS-ADAT In 1 Channel 1”. This assigns LS-ADAT In 1 Channel 1 to Record 5 Left. Similarly, click the Input Source Selection button on Record 5 Right and choose LStream > “LS-ADAT In 1 Channel 2”. This assigns LS-ADAT In 1 Channel 2 to Record 5 Right.

In this state, selecting Record 5 as the source in your recording software will allow you to record audio from ADAT In 1, channels 1 and 2.