Lynx Studio Technology
home products news & events support how to buy company contact
Search
Support Center
Downloads
Contact Tech Support

Frequently Asked Questions
Aurora
LynxONE
LynxTWO/L22
Lynx AES16 / AES16e
Lynx LS-ADAT / LS-AES
LT-HD

Software Application Notes
Hardware Test Procedures
Connector Pin Outs
Other useful documents
Videos
Support Documents
Support Forum
User Manuals
Register Your Products
Buy Cables Now
LynxONE
Getting Started/Installation
Troubleshooting
Operation
Compatibility


  • How do I monitor incoming audio?
  • What does the green LED on the LynxONE indicate?
  • I’d like to send a stereo audio stream out of the analog and digital outputs simultaneously, is this possible?
  • How do I synchronize my LynxONE with a DPS Perception Video Recorder card?
  • When I connect the LynxONE analog outputs to the MIC inputs on my Mackie mixer I hear distortion.
  • I connect my microphone directly to the LynxONE Analog Input connectors, but the level is very low, what is going on?
  • Where on the LynxONE do I connect my internal CD-ROM drive?
  • Can I leave my current sound card in my computer while using the LynxONE?
  • Can the LynxONE share interrupts with other devices?
  • Why don't I hear anything when I play a MIDI file?
  • Is it safe to connect the LynxONE analog outputs to a mixer whose inputs provide "phantom" power?
  • How do I setup the LynxONE to cross-fade between two files during playback?
  • How many LynxONE cards can be installed in a single computer?
  • What kind of latency can I expect when using a Lynx Audio Card?


When I connect the LynxONE analog outputs to the MIC inputs on my Mackie mixer I hear distortion.
All OS

The MIC inputs are being overdriven. Even with the microphone gain adjusted to its lowest setting, the maximum signal level that the MIC inputs of the smaller Mackie mixers can handle is +14 dBu. In the +4 dBu trim setting, the LynxONE is capable of delivering a +20 dBu signal. To solve this problem use 1/4" line inputs of the mixer. This requires the use of XLR to TRS adapters as described in the "External Connections" section. The LynxONE should never be connected to MIC inputs that have phantom power applied.

Home | Products | News & Events | Support | How To Buy | Company | Contact Us | Employment | Privacy

Lynx on Facebook   Support on Facebook
© Copyright 2025, Lynx Studio Technology, Inc.