Open the Aurora Remote Control software and click File > About Aurora Mixer to display the current Firmware Rev. If not using the Aurora Remote Control software, press the TRIM and POWER buttons at the same time. An LED will illuminate over a numeric value in the Aurora meter display that corresponds to the applicable firmware version (with the Aurora 8, firmware revision 13 will cause the LED for channel 7 to illuminate – this will change for revisions 14 and above). Please Note: this will only work with firmware revision 13 and above. If you have an older firmware version on your unit, the only way to determine it is via the Aurora Remote Control Software, or Aurora Firmware Update program. |